top of page

PROJECTS - SERVICES

Aerial Mapping
Aerial Mapping
Drone Aerial Mapping with Contours at Sand Mine Site

  • The project area is flown with ground control targets set.

  • The images are post processed 

    • The project is georeferenced to ground control targets.

    • A DSM is generated and any unwanted artifacts are removed. Ex. conveyors, buildings, equipment, contours on water, etc.

  • Orthorectified final image is created. 

  • Processed data is exported to AutoCAD Civil 3D and the final deliverable files are created and sent to the client for analysis. 

Stockpile Quantities by Product
Stockpile Quantites
Stockpile Quanties by Product

  • The stockpile area is flown with ground control targets set.

  • The images are post processed 

    • The project is georeferenced to ground control targets.

    • A DSM is generated and any stacking conveyors are removed.

  • Processed data is exported to AutoCAD Civil 3D where the stockpile volume is calculated. 

  • A final pdf report is submitted to the client. 

Mining Quantities Between Flight Dates
Mining quantities
Sand Mine Monthly Mining Quantities with Drone

  • The mining area is flown before and after a specified area is mined, with ground control targets set.

  • The images are post processed 

    • The project is georeferenced to ground control targets.

    • A DSM is generated and any unwanted artifacts are removed.

  • Processed data is exported to AutoCAD Civil 3D where the two flight times are compared and a volume is calculated. 

  • A final pdf report is submitted to the client. 

Mine Planning, Reserve Quantities, Overburden Quantities
Mine Planning, Reserve and Overburden Calcs

  • Project area is defined by the client and the best available existing ground is used. Ex. Drone, LiDAR

  • MSL elevation limits are defined by client.

  • Mine plan and requested quantities are calculated based on yearly plant or site throughput.

  • A final pdf report is submitted to the client. 

Mine Planing
bottom of page